Description
LED-MOV-1
Don't run the risk of an electrical short circuit in your 120V LED light fixtures. This low-profile, flat model device conveniently fits in small spaces to help limit the flow of any unwanted voltage.
Features
- Cost-effective solution; prevents downtime, improves reliability, and eliminates possible damage to LED fixtures
- For use with 120VAC LED drivers
- Thermally protected for field installation
- Protection for 10kV/10kA
Wiring Instructions
The LED-MOV-1 is wired in parrellel with the EOS board. Before connections are made- Be sure all power is off on to where the fixture is to be installed.
The normal sequence of wire hook up is:
1) The ground wire from the outlet box , the green ground wire from the fixture, and the yellow-green wire from the LED-MOV-1 are tied together with a single wire nut.
2) The 120VAC power line black wire from the outlet box, the black wire from the LED fixture, and the black wire from the LED-MOV-1 are tied together in a single wire nut.
3) The Common/neutral white wire from the outlet box, and the white wire from the LED fixture and the white wire from the LED-MOV-1 are tied together in a single wire nut.
Disclaimers
*This product typically ships in 1 to 2 business days. Larger quantities may take longer than stated lead-time. All lead-times are estimates and you will be notified by email if it will take longer than 5 business days to ship.
