Description
10W Emergency Back-Up LED Driver | Type B Lamp Compatible | 90 Minutes Operation | 120-277V
The Espen Technology VEMB10W Emergency Lighting Inverter works with Espen’s LED Flex (Type B) LED tubes in emergency system. The VEMB10W provides a maximum load of 10 Watts. It allows the connected fixture(s) to be on, off, switched or dimmed without affecting emergency operation. Each unit consists of electronic circuitry; lithium–Ion battery and charger enclosed in a steel case.
Features
- Universal 120-277V AC, 50/60Hz Input
- Open Circuit Voltage 200VDC
- Charge/Power “ON” LED Indicator Light and Push-to-Test Switch for Code Compliance Testing
- Long Life, Maintenance Free, Lithium-Ion Battery
- Output Short and Overcurrent Protection: Electronic Limiting, with Normal Operation Resuming
- 90 Minute Minimum Emergency Operating Time Over Full Temperature Range
- 24 Hour Maximum Battery Recharge Time
Installation
- For Use with Switched or Un-Switched Fixtures
- Does Not Affect Normal Operation
- Suitable for Installation on Top or in Remote of the Fixture
- Emergency Driver and Lamps Must be Fed from Same Branch Circuit
Downloads
Disclaimers
*This product typically ships in 3 to 5 business days. Larger quantities may take longer than stated lead-time. All lead-times are estimates and you will be notified by email if it will take longer than 5 business days to ship. This item ships directly from the factory.
Extra Information
Brand:
Espen Technology
UPC:
682670985780
Catalog No:
VEMB10W
Order Code:
100-005
Ballast Type:
Emergency
Light Source:
LED
Lamp Operated:
LED T8/T5
Emergency Mode:
90 mins
Operation:
Type B | LED Linear
Voltage:
120-277V
Battery:
Lithium-Ion
Safety Rating:
Meets UL924
Certifications:
OSHA, NFPA
Warranty:
5 Year
Height (in.):
1.20
Width (in.):
1.70
Length (in.):
12.68
