Description
4 ft 60W Magnetic LED Strip Retrofit Kit - 4 Lightbars | 60W/50W/36W Selectable | 3000K/4000K/5000K | 120-277V | 0-10V Dimmable
This 4 ft 60W magnetic LED strip retrofit kit from the LBS Lighting MTA series includes four magnetic lightbars and one external driver. You can set the wattage on site (60W/50W/36W, 60W default) and the color temperature (3000K, 4000K or 5000K, 5000K default). At the 60W and 5000K settings it is rated up to 7,200 lumens. The 120-277V driver dims 0-10V, from 100% down to off.
The lightbars use a lightweight white polycarbonate housing and a white diffuser for even illumination without hotspots. Magnets let you mount the bars to the existing fixture housing after the fluorescent ballast is bypassed. It is cULus listed for damp locations and DLC Qualified (confirm current qualifications at www.designlights.org). It suits commercial, industrial and educational fluorescent strip and wrap retrofits.
XY-XMTA4F460WSCSAUV Quick Facts
- Model: LBS Lighting MTA series XMTA4F460WSCSAUV, SKU XY-XMTA4F460WSCSAUV
- Vendor item code: 7A060014
- Kit: 4 magnetic lightbars and 1 external driver
- Wattage: 60W/50W/36W selectable (60W default)
- Output: up to 7,200 lumens at 5000K (60W setting)
- Color temperature: 3000K, 4000K or 5000K selectable (5000K default), CRI >80
- Input voltage: 120-277V, 50/60Hz
- Dimming: 0-10V, 100% to off
- Ratings: cULus damp location, DLC Qualified
- Size: lightbars 43.3 in. (1100.0 mm) long; driver 11.0 in. (280.0 mm) long; cross-section about 0.9 in. (22.0 mm) x 0.8 in. (21.0 mm)
- Finish: white
- Mounting: magnetic surface mount in an existing fluorescent strip or wrap housing (ballast bypass)
- Ambient temperature: -13°F (-25°C) to 113°F (45°C)
- Warranty: 5-year limited (manufacturer)
Downloads
Also Available
Applications
- Fluorescent strip and wrap fixture retrofits
- Commercial offices and retail spaces
- Warehouses, workshops and industrial plants
- Schools and other educational buildings
Disclaimers
- Selection: Verify the exact model, existing fixture size and installation requirements before ordering. This 4-lightbar kit is a different configuration from the 2-lightbar kits.
- Installation: Follow the manufacturer instructions and applicable electrical codes. Bypass the existing ballast as shown in the installation sheet.
*This product typically ships in 2 to 3 business days. Larger quantities may take longer than stated lead-time. All lead-times are estimates and you will be notified by email if it will take longer than 5 business days to ship.
