Description
42W LED Replacement Dimmable LED Driver with 0-10V Dimming - 25-42VDC Output and 1000mA Constant Current
The Billda BLD-BN60D-421000 is a dimmable constant current LED driver designed for compatible commercial and industrial LED lighting fixtures. Featuring a 1000mA output current, 25-42VDC output voltage range, and universal 100-277VAC input, this LED power supply provides regulated current for LED lighting systems requiring up to 42W of output power.
Equipped with built-in 0-10V dimming, the BLD-BN60D-421000 supports compatible lighting controls for adjustable illumination. Its slim, elongated design makes it suitable for replacement driver applications where mounting dimensions and electrical specifications match. Additional features include high power factor, low ripple output, and built-in open-circuit and short-circuit protection.
Product Specifications
- Model Number: BLD-BN60D-421000
- Product Type: LED Driver / LED Power Supply
- Driver Type: Constant Current
- Maximum Calculated Output Power: 42W
- Input Voltage: 100-277VAC
- Input Frequency: 50/60Hz
- Maximum Input Current: 0.8A
- Output Current: 1000mA (1A)
- Output Current Tolerance: +/-7%
- Output Voltage Range: 25-42VDC
- Dimming: 0-10V
- Power Factor: Greater Than or Equal to 0.90
- Efficiency: Greater Than or Equal to 86%
- Total Harmonic Distortion: 20% Maximum
- Ripple and Noise: 500mV Maximum
- Inrush Current: 55A Maximum
- Start-Up Time: 1.5 Seconds Maximum
- Open Circuit Protection: 55V Maximum
- Short Circuit Protection: Hiccup Mode
- Operating Temperature: -20°C to +50°C
- Operating Humidity: 10-80% RH, Non-Condensing
- Overall Dimensions: 12.32" L x 1.18" W x 0.84" H (313 x 30 x 21.37mm)
- Weight: 207g +/-5%
- Certifications: UL and CUL
- EMI Compliance: EN55015, EN61000-3-2 and FCC Part 15B
- Warranty: 5 Years
Benefits
- 1000mA Constant Current: Provides regulated output for compatible LED modules requiring 1A drive current.
- 0-10V Dimming: Supports compatible dimming controls for adjustable LED light output.
- Universal Input Voltage: Accepts 100-277VAC for a range of commercial electrical systems.
- Wide Output Voltage Range: Supports compatible LED loads operating between 25VDC and 42VDC.
- Slim Housing: Elongated construction designed for compatible fixture mounting spaces.
- High Power Factor: Power factor of at least 0.90.
- Efficient Performance: Minimum specified efficiency of 86% at 120VAC and 277VAC.
- Electrical Protection: Includes open-circuit and short-circuit protection.
- Reduced Output Ripple: Low ripple and noise characteristics support stable LED operation.
- 5-Year Warranty: Backed by the manufacturer's published warranty.
Applications
- Replacement drivers for compatible LED lighting fixtures
- Commercial LED lighting systems
- Industrial LED lighting fixtures
- LED fixtures requiring 1000mA constant current
- Lighting systems requiring 25-42VDC output
- LED fixtures using compatible 0-10V dimming controls
- OEM LED lighting assemblies
Downloads
Replacement Driver Compatibility
Before ordering, verify that your existing LED fixture requires a 1000mA constant current driver with an operating output voltage between 25VDC and 42VDC. Confirm the input voltage, 0-10V dimming requirements, wiring configuration, and available mounting space. This driver is not interchangeable with constant voltage power supplies or LED drivers requiring a different output current.
Disclaimers
*This product typically ships in 2 to 3 business days. Larger quantities may take longer than stated lead-time. All lead-times are estimates and you will be notified by email if it will take longer than 5 business days to ship. This product is shipped directly from the manufacturer.
Non-Returnable Item Notice:
Due to the sensitive electronic nature of LED drivers and the risk of improper installation, tampering, or programming, this item is non-returnable. Please confirm compatibility before purchasing. If your LED driver is defective upon arrival or during the warranty period, it may be eligible for a manufacturer warranty replacement. For assistance selecting the correct driver, please contact our support team.
