Name: Clear T8 Tube Guard - 4 ft - Fits LED and Fluorescent Tubes
Brand: Tube Guard
SKU: TG-4T8TG
Price: 3.59 USD
Availability: InStock

Description

48" Fluorescent Tube Protective Lamp Cover with End Caps

Tube Guard TG-4T8TG | 48" Clear T8 Fluorescent Tube Guard

A reliable solution to protect your 48" T8 fluorescent tubes from accidental breakage. This clear plastic sleeve not only safeguards your environment but also adds a customizable touch to your lighting fixtures.

Key Features:

Enhanced Safety: Contains shattered glass in case of breakage.
Durability: Constructed from high-quality, UL94-rated polymers.
Versatility: Compatible with standard T8 fluorescent tubes.
Customizable Lighting: Accommodates various colored filters for unique lighting effects.
Easy Installation: Simple to install and remove.

Important Considerations:

Heat Sensitivity: Not suitable for high-output (HO) or very high-output (VHO) lamps due to excessive heat generation.
Color Stability: While the UV filter prevents melting, it may not fully prevent color degradation on HO or VHO lamps

Specifications:

Outer Diameter (OD): 1.235"
Length: 46.5" / 92.5"
Wall Thickness: 0.014" - 0.018"

Protect your investment and enhance your lighting experience with Tube Guard TG-4T8TG.

Downloads

Disclaimers

Warning:

Not to be used with High Output light bulbs.

Minimum Order

Price is shown per tube guard but there is a minimum purchase of 24 units. Must be purchased in multiples of 24

*This product is shipped directly from the manufacturer and orders typically ships in 2 to 3 business days. Larger quantities may take longer than stated lead-time. All lead-times are estimates and you will be notified by email if it will take longer than 5 business days to ship.

**Term & Conditions: This product is non-returnable in accordance with manufacturer's return policy. All sales are considered final. If you have questions or concerns about this product, please contact us and we will happily assist you. Please note: It is not recommended using a tube guard under any condition where surface lamp temperature can exceed 200 degrees F or in an enclosed fixture where normal heat venting is prohibited. Tube guards are not recommended for use with dimming systems or applications where power surges or spikes can cause arcing or over-burning of lamps. Only use tube guards in conjunction with electronic high efficiency ballast that is designed to prevent overheating of the lamp during use and at “End of Life”. NO WARRANTY or GUARANTEE. A field test on each job is recommended prior to mass installation.

Extra Information

Brand:

Tube Guard

Order Code:

TG-4T8TG

Shade/Lens Color:

Clear

Length (in.):

46.50

Diameter (in.):

1.235" (w/o end caps)

Wall Thickness:

0.014 - 0.018

# of End Caps:

2 (Included)

Bulb Type:

T8 LED or Fluorescent

Pack:

Price Shown:

Per Tube Guard

We're currently collecting product reviews for this item. In the meantime, here are some company reviews from our past customers sharing their overall shopping experience.

4.7

25774 Reviews

5

20K+ (78%)
4

4578 (18%)
3

980 (4%)
2

65 (0%)
1

77 (0%)

96% of customers rate this company 4- or 5-stars

Highest to Lowest
Newest to Oldest
Favorite Reviews

All Ratings
5 ★ Reviews
4 ★ Reviews
3 ★ Reviews
2 ★ Reviews
1 ★ Reviews

Darlene D. Verified Customer

04-07-25

Called Customer Service to ask a few questions about this product and the gentleman was very helpful, courteous, and knowledgeable.

See Less

Chuck S. Verified Customer

04-04-25

smooth and easy.

Delivery

5 / 5

Price

5 / 5

Product Satisfaction

5 / 5

See Less

Anupama K. Verified Customer

04-03-25

User friendly Website

Delivery

5 / 5

Price

4 / 5

Product Satisfaction

5 / 5

See Less

See more reviews on Shopper Approved

Questions & Answers

Popular Questions

3 years ago

I am looking for replacement lamps for portable light towers, the numbers on the bulbs are as follows; 1000W, M47/E, R, MH1000/U/MOG. The tip of the bulb when installed is supported by a wire spider, the bulb diameter at the tip needs to be 2.25" This dimension is not listed in the specs and would like to be sure before ordering any bulbs. Is SKU PR-1028 Correct?

3 years ago

Based off the information you provided we can only state the PR-1028 item will operate off the same ballast that is running your current lamp based off the ANSI code of M47/E.

The bulb shape for the PR-1028 is a BT37, the information you provided from your current lamp does not provide this information so we are not able to answer the bulb shape size question but you can look up HID bulb shapes as that may help you determine if this item is the… See full answer »

0 | 0

See more answers

4 years ago

HI, CAN YOU PLEASE INDICATE THE CORRECT BALLAST FOR THIS BULB ?

4 years ago

Any ballast that shows it has an ANSI code of M47 is compatible with this lamp. I have provided a link below which shows a few compatible ballasts to use with this lamp.

https://lightbulbsurplus.com/search-r...

0 | 0

See more answers

4 years ago

Is 20 dollars 5he price of each unit or for the hole box