Description
Bi-Level 0-10V PIR Sensor - Line-Voltage 120-480V AC Supply - Passive Infrared Motion Detection For Lighting
The WSD LED BRI812P-D-A-D is a line-voltage bi-level PIR sensor for outdoor fixtures, rated for wet and cold locations. It runs on 120-480V AC and dims 0-10V drivers.
Key Features
- Wide voltage: 120 to 480V AC
- Outdoor rated: wet and cold location rating
- Bi-level control: dims to a standby level when the area is empty
- Daylight control: 10-2000 lux adjustable threshold
Applications
- Parking lots and area lights
- Wall packs and canopies
- Outdoor walkways
Product Specifications
- Manufacturer model: BRI812P-D-A-D
- Sensor type: Passive infrared (PIR)
- Power supply: 120-480V AC, 50/60 Hz
- Dim control output: 0-10V, 25 mA max sinking
- Detection radius: 26.2 ft (8 m), 360 degrees
- Mounting height: 40 ft (12 m) max
- Time setting: 10 sec to 15 min
- Light control: 10-2000 lux
- Maximum load: Tungsten 800W at 120V / 1200W at 277V
- Operating temperature: -40 to 158 F
- Location rating: Wet and cold locations
Alternatives
Compatible Products
Sold separately unless noted. Fit is based on the WSD spec sheet or WSD listing noted below.
- RC-100 Microwave Sensor Remote Control: RC-100 remote listed on the sheet
Additional Notes
- Warm-up: Lights stay on for 40 seconds at first power-up
Frequently Asked Questions
What voltages does it accept?
120V to 480V AC.
Can it be used outdoors?
Yes. It is rated for wet and cold locations.
How high can it mount?
Up to 40 ft.
Downloads
Disclaimers
- Selection: Verify the exact model and installation requirements before ordering.
- Installation: Follow the manufacturer instructions and applicable electrical codes.
*This product typically ships in 2 to 3 business days. Larger quantities may take longer than stated lead-time. All lead-times are estimates and you will be notified by email if it will take longer than 5 business days to ship.
