Description
WSD-AFW2842567W48-345K-D-T4 Outdoor Wall Light - Color & Wattage Selectable
Light commercial entrances, walkways and building perimeters with a full cutoff LED outdoor wall pack designed to direct light downward. This bronze architectural fixture offers four wattage settings and three selectable color temperatures on a 277-480V circuit. Choose 3000K Soft White for dark sky lighting projects that allow a maximum color temperature of 3000K. The manufacturer specifies this 277-480V version without a photocell.
Dark Sky Installation Requirement: This fixture must be set to 3000K Soft White for applications requiring a maximum color temperature of 3000K. It ships preset to 4000K, so the setting must be changed during installation. Mount the fixture in its intended downward-facing position to maintain full cutoff performance. Final compliance depends on the project's light-output limits, controls and local lighting requirements.
Product Specifications
- Model: WSD-AFW2842567W48-345K-D-T4
- Fixture type: Full cutoff architectural LED wall pack
- Selectable wattage: 28W, 42W, 56W or 70W
- Selectable color temperature: 3000K Soft White, 4000K Cool White or 5000K Daylight
- Dark sky project setting: 3000K, subject to project requirements
- Input voltage: 277-480V AC
- Light output: 4760 LM, 6880 LM, 8601 LM or 11124 LM
- Light distribution: Type IV
- Photocell: Not included on the 277-480V version
- Dimming: Continuous 0-10V with compatible controls
- Housing: Die-cast aluminum
- Lens: Polycarbonate
- Finish: Dark bronze
- Location rating: Wet location
- Color rendering index: Greater than 70
- Operating temperature: -22 to 113 degrees F
- Rated life: Over 50,000 hours
- Factory settings: 70W and 4000K
- Warranty: 5-year limited
Benefits
The full cutoff design limits direct uplight when properly installed, while the 3000K setting provides a warmer alternative to the fixture's 4000K and 5000K options. Select the lowest wattage that meets the site's illumination requirements to avoid unnecessary brightness.
Compatible 0-10V dimming controls provide additional output adjustment. Motion sensors are available separately and are not included with this model. The official datasheet states that 277-480V architectural wall packs are supplied without a photocell.
Applications
Use this commercial wall pack for office buildings, retail properties, warehouse exteriors, service entrances and building-side walkways on 277-480V circuits. For dark sky projects, evaluate fixture placement and photometric data to confirm adequate illumination while limiting light spill onto neighboring properties.
Which Setting Should I Use for Dark Sky Lighting?
Select 3000K Soft White. The 4000K Cool White and 5000K Daylight settings exceed a 3000K maximum. Full cutoff construction and the correct color temperature support responsible outdoor lighting, but do not by themselves establish DarkSky Approved certification or compliance with every local ordinance.
Does This Wall Pack Include a Photocell or Motion Sensor?
No. The manufacturer specifies the 277-480V version without a photocell. Motion sensing also requires a separate compatible accessory.
Optional Accessories (Field Installed)
Motion Sensor (sold separately):
- NLC-BT-MW-GE-001 Bluetooth microwave fixture sensor (WSD-601.0409) - sold separately.
- NLC-MW-PT-002 Bi-level microwave motion sensor (WSD-NLC-MW-PT-002) - sold separately.
Remote Controller (sold separately; for use with compatible microwave sensors):
- RC-100 microwave sensor remote control (WSD-RC-100) - sold separately.
Downloads
Other Wattages
- WSD-AFW12182430W27-345K-D-P-G2 - 12-30W Architectural LED Wall Pack - AC 120-277V
- WSD-AFW2842567W27-345K-D-T4-P - 28-70W Architectural LED Wall Pack - AC 120-277V
- WSD-AFW48729612W48-45K-D-T4 - 48-120W Architectural LED Wall Pack - AC 277-480V
- WSD-AFW6699132165W27-345K-D-T4-P - 66-165W Architectural LED Wall Pack - AC 120-277V
Disclaimers
- Selection: Verify the exact model and installation requirements before ordering.
- Installation: Follow the manufacturer instructions and applicable electrical codes.
*This product typically ships in 2 to 3 business days. Larger quantities may take longer than stated lead-time. All lead-times are estimates and you will be notified by email if it will take longer than 5 business days to ship.
