Description
300W LED Shoebox Area Light for Parking Lots and Site Lighting - 5000K Daylight
The WSD-SB30W27-50K-D-T3 is a shoebox area light for parking lots, car dealerships, walkways and streets. Its slim die-cast housing replaces metal halide shoebox heads on existing poles.
Ideal application: with 42,132 lumens at 300W, this shoebox light is built for large areas that need a lot of light, such as big parking lots, car dealerships, stadium-adjacent lots, industrial yards, ports, and logistics yards.
Key Features
- Metal halide replacement: WSD positions the series as a replacement for 100W to 1000W metal halide area lights
- Lumileds LEDs: high-efficiency LEDs with a die-cast aluminum heat sink
- Dimming ready: 0-10V dimming for controls and scheduling
- Wet-location rated: IP65 housing for open parking lots and streets
Applications
- Commercial parking lots
- Car dealerships
- Walkways and street lighting
- Industrial yards
Product Specifications
- Manufacturer model: WSD-SB30W27-50K-D-T3
- Wattage: 300W
- Lumens: 42,132 lm (sheet value for 300W)
- Efficacy: 140 lm/W
- Color temperature: 5000K
- CRI: 70
- Input voltage: AC 120-277V
- Dimming: 0-10V
- Distribution: Type III (T3)
- Power factor: 0.95
- Driver efficiency: 90%
- Location rating: Wet location, IP65
- Rated life: Over 50,000 hours
- Operating temperature: -22 to 113 F
- Lead wire: 3-core 18 AWG, 19.69 in.
- Housing: Die-cast aluminum
- Finish: Dark bronze
- Warranty: 5 year limited
- Fixture length (B): 25.35″ (644 mm)
- Fixture width (A): 15.85″ (403 mm)
- Fixture height (C): 3.35″ (85 mm)
Other Color Temperatures
- WSD-SB30W27-40K-D-T3 - 300W LED Shoebox Light 4000K AC120-277V
- WSD-SB30W48-50K-D-T3 - 300W LED Shoebox Light AC277-480V
Mounting Hardware (sold separately)
Sold separately unless noted. Fit is based on the WSD spec sheet or WSD listing noted below.
- WSD-SBT-D - Lighting Fixture Trunnion Mounting Bracket: WSD-SBT-D trunnion for wall or surface mounting
- WSD-NEWSBARM2-D arm mount for 4 in. and 5 in. poles (WSD-916.60001) - sold separately
- WSD-NEWSBSF2-D slip fitter for 2-3/8 in. O.D. tenon (WSD-916.70001) - sold separately
- WSD-SFARM2-D arm and slip fitter for 4 in. and 5 in. square poles and 2-3/8 in. O.D. tenon (WSD-921.0078) - sold separately
Other Compatible Products
Sold separately unless noted. Fit is based on the WSD spec sheet or WSD listing noted below.
- OJ-M715-B Twist-Lock Shoebox Photocell 120V-277V: twist-lock photocell, sold separately
- SBPBS-JB Shoebox Photocell Junction Box Accessory: shoebox photocell junction box, sold separately
- NLC-MW-SQ-006 - Bi-Level Microwave Sensor - 12-24V DC: motion sensor, sold separately
- RC-100 Microwave Sensor Remote Control: remote controller for compatible motion sensors, sold separately
Additional Notes
- Mounting: Installation parts are sold separately
- Optics: Type II, III, IV and V optics are listed on the sheet; this model is Type III
Frequently Asked Questions
What mounting options are available?
Mounts are sold separately. The sheet lists the WSD-NEWSBSF2-D slip fitter for a 2-3/8 in. O.D. tenon, the WSD-NEWSBARM2-D arm, the WSD-SFARM2-D mount, the WSD-SBT-D trunnion and two square-tube light bars.
Is it dimmable?
Yes. It has a 0-10V dimming driver.
Downloads
Disclaimers
- Selection: Verify the exact model and installation requirements before ordering.
- Installation: Follow the manufacturer instructions and applicable electrical codes.
*This product typically ships in 2 to 3 business days. Larger quantities may take longer than stated lead-time. All lead-times are estimates and you will be notified by email if it will take longer than 5 business days to ship.
