Description
1.75A Constant Current Replacement LED Driver with 0-10V Dimming
The ZH-HBG-200NL-150H is a dimmable, constant current LED driver listed at 200W. It delivers 1.75A across a 90-150V DC output range and accepts 120-277V AC input. For replacement, verify the fixture's LED current, operating voltage, dimming method, and available mounting space.
Product Specifications
- Model: ZH-HBG-200NL-150H
- Driver type: Round non-isolated constant current LED driver for UFO high bay fixtures
- Catalog wattage: 200W
- Datasheet maximum output power: 200W
- Output current: 1.75A (catalog setting); series range 0.9-2.0A
- Output voltage: 90-150V DC
- Input voltage: 120-277V AC (datasheet rated 110-277V AC)
- Dimming methods: 0-10V, PWM, or resistor (H suffix)
- Auxiliary power: Included with H suffix per datasheet
- Efficiency: up to 94% at 150V output
- Surge protection: 5kV L/N-PE, 4kV L-N
- Ingress rating: IP65, indoor and outdoor
- Case dimensions: 130 mm diameter x 59 mm height (5.12 x 2.32 in.)
- Protections: Short circuit, over current, and over voltage
- Warranty: 5 years
Downloads
Benefits
The driver maintains a constant 1.75A output for compatible LED modules and supports 0-10V, PWM, or resistor dimming. The 120-277V AC input covers common 120V and 277V fixture circuits.
This is a non-isolated driver design, so the LED board must be properly insulated per the manufacturer datasheet.
Applications
Use as a replacement driver in UFO round high bay fixtures whose LED modules require 1.75A constant current and operate within 90-150V DC. Compare the wiring and mounting arrangement with the original driver before ordering.
Does this driver include a 12V auxiliary output?
The datasheet lists the H suffix as 3-in-1 dimming plus auxiliary power. Confirm the auxiliary lead voltage against your fixture before ordering.
Replacement Questions for the ZH-HBG-200NL-150H
My old LED driver says 1.75A, 90-150V DC, and 120-277V AC. What replacement matches those specs?
The ZH-HBG-200NL-150H matches those electrical ratings. It supplies 1.75A constant current at 90-150V DC and accepts 120-277V AC input. Before ordering, compare the mounting dimensions and wiring with your original driver.
Will the ZH-HBG-200NL-150H work on a 277V circuit with 0-10V dimming?
Yes. The ZH-HBG-200NL-150H accepts 277V AC input and supports 0-10V, PWM, or resistor dimming. It is a candidate if your LED module requires 1.75A and operates within 90-150V DC.
Disclaimers
*This product typically ships in 2 to 3 business days. Larger quantities may take longer than stated lead-time. All lead-times are estimates and you will be notified by email if it will take longer than 5 business days to ship. This item ships directly from the factory.
Non-Returnable Item Notice:
Due to the sensitive electronic nature of LED drivers and the risk of improper installation, tampering, or programming, this item is non-returnable. Please confirm compatibility before purchasing. If your LED driver is defective upon arrival or during the warranty period, it may be eligible for a manufacturer warranty replacement. For assistance selecting the correct driver, please contact our support team.
