Description
100W Dimmable LED Power Supply | 120-277V Input | 24V Constant Voltage | IP65 Rated
The AC Electronics AC-A100VD24H4.1 is a 100W constant voltage LED driver designed for 24V LED lighting systems requiring reliable 0-10V dimming performance. This side-mount driver features 120-277V universal input, IP65 rating, Class 2 output, and built-in protection features for commercial LED lighting applications.
Product Specifications
- Brand: AC Electronics
- Model Number: AC-A100VD24H4.1
- Driver Type: Constant Voltage LED Driver
- Output Power: 100W
- Input Voltage: 120-277V
- Input Frequency: 50/60Hz
- Input Current: 0.98A at 120V, 0.42A at 277V
- Output Voltage: 24V +/-5%
- Output Current: 410mA to 4100mA
- Input Power: 111W
- Minimum Power Factor: >0.90 at full load
- Maximum THD: <20% at full load
- Efficiency: 90% or greater
- Dimming Protocol: 0-10V
- Dimming Range: 15% to 100%
- Maximum Case Temperature: 90 C
- Minimum Starting Temperature: -40 C
- IP Rating: IP65
- Surge Protection: 3KV
- Mounting Type: Side Mount with Leads
- Length: 9.5 inches
- Width: 2.4 inches
- Height: 1.46 inches
- Mounting Length: 8.9 inches
- Mounting Hole Distance: 1.5 inches
- Mounting Hole Diameter: 0.20 inches
- Weight: 1.98 lbs.
- Case Quantity: 20 pcs.
- UPC: Cannot Source
Benefits
- Constant voltage 24V output supports compatible LED lighting systems
- 0-10V dimming allows adjustable light output from 15% to 100%
- Universal 120-277V input supports commercial and industrial electrical systems
- IP65 rating supports use in applications requiring added protection from dust and moisture
- Built-in overload, open circuit, and short circuit protection helps protect the driver and lighting system
- 3KV surge protection adds durability in demanding electrical environments
- Long life expectancy of 50,000 hours at Tcase of 75 C or lower and 100,000 hours at Tcase of 65 C or lower
Applications
- Commercial LED lighting systems
- 24V constant voltage LED fixtures
- Architectural LED lighting
- Linear LED lighting systems
- Low voltage LED installations requiring 0-10V dimming
- Replacement LED driver applications where specifications match the existing driver requirements
Safety and Compliance
- UL and cUL Recognized
- UL1310 Class 2
- UL Outdoor Type 1
- RoHS Compliant
- Lead-Free
- Class A Sound Rating
- FCC Title 47 CFR Part 15
- Input/Output Isolation
Installation Notes
- LED drivers shall be installed inside electrical enclosures
- LED driver cases should be grounded
- 18 AWG 600V/105C tinned strand copper lead wires are required for installation
- Lead lengths: black 5.9 inches, white 5.9 inches, blue 5.9 inches, red 5.9 inches, purple 7.1 inches, pink 7.1 inches
- The gray negative dimming wire has been changed to pink per 2020 NEC section 410.69 and NEMA
Recommended Dimmers
- Lutron NFTY-WH
- Hunt PS-010
- Leviton DS710-10Z
- Leviton IP710-DL
Warranty
- 5 year warranty when operated at maximum case temperature below 75 C
- 3 year warranty when operated at maximum case temperature of 75 C to 90 C
Downloads
Disclaimers
Non-Returnable Item Notice:
Due to the sensitive electronic nature of LED drivers and the risk of improper installation, tampering, or programming, this item is non-returnable. Please confirm compatibility before purchasing. If your LED driver is defective upon arrival or during the warranty period, it may be eligible for a manufacturer warranty replacement. For assistance selecting the correct driver, please contact our support team.
