Description
Directional Floodlight - Red, Blue, Green or Amber - IP66 Rated - 115°H x 100°V, NEMA 7H x 6V Beam Spread
The commercial grade LEPG LFB1 C3 ColorLED static color flood light luminaire is available with a knuckle mounting feature with 115°H x 100°V, NEMA 7H x 6V distributions designed to provide accent colored light using Blue, Green, Red or Amber COB LEDs. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting can be accomplished using ground attachment accessories and up to heights of 12 feet based on light level and uniformity requirements.
Features
- Die Cast Aluminum Housing and Front Frame with Separate Ballast Compartment.
- Integral Heat-Dissipating Fins for Thermal Management.
- ½Ćā¹ĆĀ Threaded Aperture with Liquid-Tight Connector.
- CSA: Listed for Wet Locations, ANSI/UL 1598, 8750
- IP66 Sealed LED Compartment.
- Textured Architectural Bronze Powder-coat Finish Over a Chromate Conversion Coating.
- Clear Flat Glass Lens.
- Adjustable Knuckle with ½” NPS Threads.
- Color LED COB
- 20w COB: 20w, System: 21w; (100w HID Equivalent)
- Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard
- Internal Surge Protection 2kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps.
- 5-Year Warranty for -40°C to +50°C Environment.
- 128,000 hr rated avg life in -30°C to +50°C Environments.
Note: Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory. Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers.
Wattages
- 20 Watt 100W HID Replacement
Downloads
