Description
Programmable Constant Current LED Driver | 30W Max | 120-277V | 0-10V Dimming | USB-C Port
Keystone KTLD-30-UV-SC1050-56-VDIM-U7 /USB is a 30W constant current programmable LED driver with 350-1050mA output current and 10-56V output voltage. This Smart Current driver operates on 120-277V input power, supports 0-10V dimming down to 1% at maximum output current, and includes a built-in USB-C port for programming with an Android device and Keystone app.
Product Specifications
- Brand: Keystone
- Model: KTLD-30-UV-SC1050-56-VDIM-U7 /USB
- Product Type: Constant current programmable LED driver
- Driver Type: Constant Current
- Maximum Output Power: 30W
- Output Current: 350-1050mA
- Output Voltage: 10-56V
- Open Circuit Voltage: 60V
- Input Voltage: 120-277V AC +/-10%
- Input Frequency: 50/60 Hz
- Dimming Type: 0-10V
- Dimming Range: Down to 1% at maximum output current
- Programming Method: USB-C cable and Android device with Keystone app
- Built-In Port: USB-C programming port
- Programmable Drive Current: 350-1050mA in 10mA increments
- Programmable Minimum Dimming Level: 1%, 3%, 5%, 7%, or 10%
- Programmable Dimming Curve: Linear, Log, Inverse Log, or Square-law
- Programmable Minimum Dimming Voltage: 1V, 1.5V, or 2V
- Programmable Maximum Dimming Voltage: 7V, 8V, or 9V
- Programmable Dim-to-Off Voltage: 0.8V, 1V, 1.2V, or N/A
- Programmable Thermal Foldback Temperature: 75 C, 80 C, 85 C, or 90 C
- Auxiliary Power: 12V DC, 200mA max
- Power Factor: >0.9 under 120-277V input with 80-100% load condition
- Maximum Input Current: 0.31A at 120V, 0.17A at 240V, 0.15A at 277V
- Inrush Current: 24A peak at 277V AC
- THD: <20%
- Load Regulation: +/-2%
- Line Regulation: +/-1%
- Output Tolerance: +/-5% at full load condition
- Turn-On Delay Time: <2 seconds at full load condition
- Overshoot: <10% at full load condition
- No Load Power Consumption: <1.5W
- Ripple and Noise: <3%
- Typical Efficiency: 87% at 120V, 88% at 240V, 88% at 277V
- Remote Mounting Distance: 35 ft with #18 AWG wire
- Class 2: US
- Sound Rating: Class A
- Protection: Over voltage, over current, short circuit, open load, overload, and over temperature protection
- Protection Mode: Hiccup mode with auto recovery after fault is removed
- Withstand Voltage: Input to output, 2800V DC, 2mA
- Leakage Current: Maximum 0.5mA at 277V AC, 60 Hz input
- Safety Compliance: UL 8750, Class P, Type HL, UL1310 Class 2
- CE Compliance: EN61347-1 and EN61347-2-13
- FCC Compliance: ANSI C63.4:2009 Class B consumer limit
- Harmonic Current Compliance: EN61000-3-2 Class C
- Operating Temperature: -20 C to 50 C
- Storage Temperature: -40 C to 85 C
- Humidity: 5% to 95%
- MTBF: 397,500 hours at 40 C ambient
- Life Rating: 85,000 hours at 120V AC input, 100% load, and 60 C case temperature
- Maximum Case Temperature: 90 C
- Maximum Case Temperature for 5-Year Warranty: 75 C
- Case Style: U7
- Case Material: Metal
- Length: 11.02 inches
- Width: 1.20 inches
- Height: 1.00 inch
- Mounting Length: 10.63 inches
- Wiring Type: Input, output, and dimming terminal blocks
- Required Accessory: KTLD-SC-USBC USB-C to USB-C cable, included with driver
- Packaging Style: Carton pack
- Pack Quantity: 40
- Item Status: Quick Ship
- Warranty: 10 year limited warranty
- UPC: 843654136097
Benefits
- Programmable 350-1050mA output allows one driver to support multiple compatible LED loads.
- Built-in USB-C port simplifies field programming with an Android device and Keystone app.
- 0-10V dimming down to 1% supports advanced lighting control requirements.
- Programmable dimming settings allow contractors to adjust dimming behavior for the application.
- Auxiliary 12V DC output supports compatible accessories.
- Terminal block wiring supports clean installation and service access.
- Metal U7 case provides a durable driver housing for commercial fixture applications.
- Over voltage, over current, short circuit, open load, overload, and over temperature protection help protect the driver and LED load.
Applications
- Programmable LED driver replacement projects
- Commercial LED fixture repairs
- Constant current LED lighting applications
- 0-10V dimmable LED fixtures
- Fixture manufacturing and retrofit projects
- Facility maintenance LED driver replacements
- Applications requiring field-adjustable output current
Downloads
Non-Returnable Item Notice:
Due to the sensitive electronic nature of LED drivers and the risk of improper installation, tampering, or programming, this item is non-returnable. Please confirm compatibility before purchasing. If your LED driver is defective upon arrival or during the warranty period, it may be eligible for a manufacturer warranty replacement. For assistance selecting the correct driver, please contact our support team.
