What should I verify before ordering LED tubes in bulk?

Verify lamp length, pin type, retrofit method (Type A, Type B, Type C, or Hybrid), voltage requirements, color temperature, and lumen output. Also confirm any special conditions like enclosed fixtures or damp locations. Confirming these details upfront helps large projects go smoothly.

FREE SHIPPING ON ORDERS OF $1000 OR MORE*

Home
Light Bulbs
LED
LED Tubes

LED Tubes

Q: How do I choose the right LED tube to replace my fluorescent?

Confirm the lamp length (2ft/3ft/4ft/5ft/8ft), the pin type (G13, Fa8, or R17d), and choose the retrofit method: Type A (plug-and-play), Type B (ballast bypass), Type C (external driver), or Hybrid. Selecting the correct tube type for your fixture and wiring method is usually the most important step.

Q: What is the difference between Type A, Type B, and Type C LED tubes?

Type A runs on a compatible fluorescent ballast for the fastest installation. Type B bypasses the ballast and requires rewiring the fixture for long-term reliability. Type C uses a dedicated external LED driver for maximum control and performance. Hybrid tubes support more than one installation method.

Q: Can I use an LED tube in my existing fluorescent fixture without rewiring?

Yes. Type A (plug-and-play) LED tubes are designed to operate on compatible fluorescent ballasts with no fixture rewiring. Because compatibility varies by ballast, confirm ballast compatibility before ordering.

Q: How do I tell if my fixture is single-pin (Fa8) or bi-pin (G13)?

Most 4ft T8 fixtures use G13 medium bi-pin sockets (two pins per end). Many 8ft fixtures use Fa8 single-pin (one pin per end) or R17d recessed double contact. Verify the socket type and pin configuration before purchasing to ensure the correct lamp fit.

Q: Is ballast bypass (Type B) safe, and who should install it?

Type B ballast bypass requires rewiring the fixture to bypass or remove the ballast and should be installed by a qualified electrician or experienced installer. Once properly wired, Type B installations often reduce long-term maintenance by removing ballast-related failure points.

Q: Will LED tubes stop flickering or humming from my fluorescent lights?

Often yes. Flicker and humming are commonly caused by aging ballasts or fluorescent lamps. Upgrading to LED tubes can reduce or eliminate these issues, especially when using a compatible new ballast for Type A or removing the ballast entirely with Type B.

Q: What color temperature should I choose for offices vs warehouses?

Offices commonly use 3500K to 4000K for comfortable, clean light. Warehouses and industrial areas often use 4000K to 5000K for brighter visibility. Matching existing lighting and the space’s purpose typically delivers the best result.

Q: Do LED tubes work with dimming?

Some LED tubes support dimming, but it depends on the tube type and the fixture’s control gear. Type C (external driver) is commonly used when dimming control is required. Always confirm dimming compatibility before ordering.

(Showing 24 of 134)

Upgrade fluorescent fixtures with LED tubes designed for T8, T5, and T12 replacements. Backed by Light Bulb Surplus’s decades of commercial lighting experience, with plug-and-play and ballast bypass options to fit your needs.

LED Tubes – Fluorescent LED Retrofits – Linear Replacement Lamps

Upgrade your commercial or industrial lighting with our extensive selection of LED tubes and fluorescent LED retrofits. Designed to replace energy-hungry T8, T5, and T12 fluorescent lamps, our LED tubes deliver improved light quality, reduced energy consumption, and a significantly longer service life. Whether you need a fast plug-and-play upgrade or a long-term ballast bypass solution, we offer the product depth and technical expertise to support your project from selection through installation.

Also Commonly Searched As

Fluorescent to LED conversion kits
T8 LED replacement lamps
Ballast bypass LED tubes
Plug and play LED tube lights
Linear LED retrofit lamps
4ft LED tube replacements

Why Switch to LED Tubes?
Converting from traditional fluorescent lighting to LED technology is one of the most impactful upgrades for commercial and industrial facilities. LED tubes eliminate common issues such as flickering, humming ballasts, and slow start-up while delivering instant, consistent illumination.

Up to 60% energy savings compared to fluorescent lamps
Reduced maintenance costs with 50,000+ hour rated life
Improved light distribution and color rendering (CRI)
No mercury or hazardous materials
Compatible with most existing troffers and strip fixtures

Understanding LED Tube Types
Choosing the correct retrofit method is critical for performance, safety, and long-term reliability. Each LED tube type offers different installation requirements, maintenance considerations, and operational benefits. We stock all major UL-classified options to match your electrical and application needs.

Type A (Plug and Play): Operates with existing fluorescent ballasts for the fastest installation and minimal labor.
Type B (Ballast Bypass): Requires rewiring to bypass the ballast, delivering maximum reliability and reduced future maintenance.
Type C (External Driver): Uses a dedicated LED driver for superior efficiency, control, and advanced dimming capabilities.
Dual Mode (Hybrid): Flexible tubes that can operate with a ballast or as a direct-wire solution.

Common Applications for Linear LED Retrofits
LED tubes are the preferred lighting solution for high-use environments where performance, longevity, and energy efficiency are essential.

Office buildings and commercial troffers
Warehouses and industrial facilities
Retail stores and display lighting
Schools, hospitals, and public buildings
Parking garages and stairwells

Important Technical Considerations
Before ordering, confirm your existing fixture length—commonly 2ft, 4ft, or 8ft, including 3ft and 5ft specialty lengths—and pin configuration such as G13 medium bi-pin, Fa8 single pin, or R17d recessed double contact. Since 1982, Light Bulb Surplus has been a trusted partner for commercial lighting upgrades. Our 33,000 sq ft warehouse supports deep inventory across T8, T5, and T12 LED retrofit solutions to keep projects moving without delays.

Ideal for Large-Scale Facility Upgrades
We specialize in supporting facility managers, contractors, and maintenance teams with bulk quantities, consistent product availability, and knowledgeable technical support. Our LED tubes are selected for durability and dependable performance in demanding environments. Our team can also help you select the correct tube type, color temperature, and wiring method for your specific fixtures, ensuring a smooth transition from legacy fluorescent systems.

FAQ

1) How do I choose the right LED tube to replace my fluorescent?
Start by confirming (1) lamp length (2ft/3ft/4ft/5ft/8ft), (2) pin type (G13, Fa8, R17d), and (3) which retrofit method you want—Type A (plug-and-play), Type B (ballast bypass), Type C (external driver), or Hybrid. If you’re unsure, choosing the retrofit type is usually the biggest decision.

2) What’s the difference between Type A, Type B, and Type C LED tubes?
Type A uses an existing fluorescent ballast (fastest install). Type B bypasses the ballast and rewires the fixture (best long-term reliability). Type C uses an external LED driver (best control/dimming performance). Hybrid tubes support more than one method.

3) How do I know if I need Type A plug-and-play or Type B ballast bypass?
If you want the quickest install and your ballast is in good shape, Type A is often easiest. If you want to eliminate future ballast failures and reduce maintenance, Type B (ballast bypass) is commonly the best long-term choice.

4) Can I use an LED tube in my existing fluorescent fixture without rewiring?
Yes—Type A (plug-and-play) tubes are designed to run on compatible fluorescent ballasts. Compatibility varies by ballast, so confirm ballast compatibility before ordering.

5) How do I tell if my fixture is single-pin (Fa8) or bi-pin (G13)?
A 4ft T8 fixture commonly uses G13 medium bi-pin (two pins on each end). Many 8ft fixtures use Fa8 single-pin (one pin per end) or R17d recessed double contact. The safest approach is to verify the socket type and pin configuration before purchasing.

6) Is ballast bypass (Type B) safe, and who should install it?
Type B requires rewiring the fixture to bypass/remove the ballast and should be installed by a qualified electrician or experienced installer. Once properly wired, Type B setups often reduce long-term maintenance by eliminating ballast-related failures.

7) Will LED tubes stop flickering or humming from my fluorescent lights?
Often yes. Flicker and humming are frequently caused by aging ballasts or lamps. Many upgrades solve these issues, especially when switching to a new compatible ballast (Type A) or removing the ballast entirely (Type B).

8) What color temperature should I choose for offices vs warehouses?
Offices often use 3500K–4000K for comfortable, clean light. Warehouses and industrial areas commonly use 4000K–5000K for brighter visibility. Matching existing lighting and the space’s purpose usually leads to the best results.

9) Do LED tubes work with dimming?
Some do, but dimming depends on the tube type and the fixture’s control gear. Type C (external driver) is most common for controlled dimming systems. Always confirm dimming compatibility before ordering.

10) What details should I verify before ordering LED tubes in bulk?
Verify length, pin type, retrofit method (Type A/B/C/Hybrid), voltage requirements, color temperature, lumen output (brightness), and any special conditions like enclosed fixtures or damp locations. Bulk projects go smoother when these are confirmed up front.